Only one hole is required for mounting. Virtually any nozzle may be stores in one of the four cup models available. Measure diameter at discharge end of nozzle to determine which cup is required.

Additional cup mounts available for use with SCBA, fire extinguishers, and other cylindrical items.

All cup mounts are shipped with a tie down safety strap. The strap has a brass grommet. The hex head bolt should pass down through the cup , bracket, and grommet, with a flat washer and nut affixed to the bolt.

For mounting on flat vertical surface - Bolt long 6-7/8" side of bracket to flat vertical mounting surface using same size bolts, lock washers, and nuts (not included) as above. Insert bolt of nozzle cup mount into center hole of  the farthest three holes of the short 5" horizontal side of the bracket, and tighten securely with lock washer and nut provided.